Knowledge Base



KB10239 - Eliminate short breaks between CGM/SVG symbols forming a line.

Check the following:

  1. Make certain LineSymbolGap=0.
  2. Test CGM symbol in our sample CGM viewer (refer to DK sample set #1) to confirm it does not have an embedded border.
  3. The symbol used to create the line should start at (0,0), which will be a rotation point.
  4. During rendering the line formed with a repetitive symbol is generalized so that any sub-line will match the symbol width. To smoothen such line generalization, try composing the line with narrower symbols or applying a smaller LineWidth.
Created: December 17, 2004, Modified: December 22, 2015
follow us on Facebook  follow us on Twitter  follow us on Google +  follow us on LinkedIn  Embarcadero